Setting the telephone mode, Operation of teiephone mode – Panasonic Panafax UF-322 User Manual

Page 57

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

1Цов1У4|щ42||ситш^

Telephone Mode

When your machine is set to this mode, your machine wiii not receive documents automatically. If you receive
a fax call, follow the procedure to receive documents manually.

Setting the Telephone Mode

Change Fax Parameter No. 15 (ATTENDED MODE) to 1 : Tel. (see page 33)

HCV MOPE

Confirm that the lamp is OFF and the display as shown to
the right.

08-DEC-1993 15:00

RCV MODE=TEL 00%

Operation of Teiephone Mode

When your telephone rings, lift the fax handset or an extension phone.

|Tf you hear a beep from the phone, it means someone wants to send a fax. Or, if the caller |

answers and says he/she wants to send a fax, then...

Remove the document from ADF, if any.

you answered the caii using the^

3a [

|_fax handset, (See Note 1)

Ф START

Hang up the phone.

|~if you answered the call on an |
l_extension phone,

within 1 second
from the extension
phone, (see Note 2)

Your machine will be activated

remotely.

NotB: 1. If your machine does not have the handset, follow the step 3b.

2. Ibis procedure is called "REMOTE RCV" and will work on a touch tone phone. If your extension

phone is not touch tone phone, press I START I on the control panel of your fax machine.