Panasonic Panafax UF-322 - Manual (Page 52)

Sending,
Multifile Transmission
When you have to send several documents to different stations, you do not have to wait until each
transmission is completed. You can store all the different documents into memory and program the machine
to diai each telephone number for each document. Instead of sending the documents separately, you can
reserve all the transmission at one time.
1
2
3
4
5
6
Set document(s) face down.
MEMORY
Make sure that the MEMORY lamp is on.
Dial by any combination of the following methods.
• Manual Number Dialling (Up to 12 stations total in all files)
• One-Touch Dialling
• Abbreviated Dialling
(For details, see page 44 to 46.)
Ex: 01
I ABBR
(When entering a station for Manual Number Dialling, press
I SET " I after each station is entered.)
MEMORY
^—I
to store the document into memory.
The document is stored into memory with a file number.
Repeat step 1 through 4 for each document that you are
sending, (see Note 3)
<5> START
'tj
Your machine starts to dial the telephone number in
sequence.
DOCUMENT SET
ENTER STATION 00%
ONE-TOUCH
<01>(Station name)
ABBR STNS=002l
[10](Station name)
I
STORE * N0.001
PAGES=01 01%
* STORE * COMPLETED
TOTAL PAGES=05 25%
* DIALLING *
<01>(Station name)
HI
Note: 1. You can review the stations you entered in step 3 before storing your document into memory by
pressing or0. Press PCLEAR I to clear an entered station show on display if needed.
2. The home position of MEMORY key can be set by Fax Parameter No. 05.
3. Up to 8 Memory Transmission fiies (6 Deferred Communication, 1 Foiling XMT fiie, 7 Mailboxes ora
combination not exceed maximum 8 files) can be set.
52