Setting for normal polling – Panasonic Panafax UF-322 User Manual
Page 73
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
'Ss'.
Setting for Normal Polling
To set a Program Key for normal polling
1
5
FUNCTION
5ET
PROGRAM [P ]
PRESS PROGRAM KEY
2
3
PROGRAM
[PI]
NO.=|
1:PROG 2:ONE-TOUCH
POLLING
PASSWORD=||||
4
Enter a 4-digit polling password.
Ex; UllTlLIin] and
I
SET
~ l
The polling password appears if it has been previously set.
PROGRAM[PI]
ENTER STATION(S)
]
5
Enter station numbers by using a One-Touch key, or
I
ABBR
I
and a 2-digit code.
Ex:
02
You may use the 0 or 0 keys to review the entered
station(s) before going to the next step. If you find an error,
press
I
CLEAR
I
to erase the displayed station.
ONE-TOUCH
<02>{Station name)
]
6
7
SET
Enter the program name (up to 15 characters) using the
Character keys (see page 9).
Ex: PROG.A and I SET
I
You can now set other Program Keys by repeating the
procedures from Step 2, or return to standby by pressing
I STOP i.
PROGRAM [PI]
I
name
I
PROGRAM [P 1
ENTER PROGRAM KEY
73