Panasonic Panafax UF-322 User Manual
Page 137
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
In general, most bond papers will produce excellent results. Most photocopy papers will also work very well.
There are many "name" and "generic” brands of paper available. We recommend that you test various papers
until you obtain the results you are looking for.
The following table summarizes the major specifications to consider when selecting white or colored paper.
Basic Weight
60 to 90 g/m2
Cut Edge Conditions
Cut with sharp blades, no visible frayed edges
Finishing Dimensions
±0.8 mm of nominal, corners 90° ±0.2°
Grain
Long grain
Moisture Content
4% to 6% by weight
Opacity
84% minimum
Packing
Polylaminated moisture-proof ream wrap
Sizes
Letter : 216 mm x 279 mm
A4 : 210 mm X 297 mm
Legal : 216 mm x 356 mm
Type
Cut sheet
Wax Pick
304.8 mm minimum (Dimension)
in
Note: It is possible that paper could meet all of the specifications listed above and stili not print well because of
the variations in paper manufacturing. Therefore, we recommend that you test paper thoroughly before
purchasing.
137