Panasonic Panafax UF-322 - Manual (Page 82)

Xz .
f!' -
The Fax Access Code prevents an unauthorized user from operating the machine. Once a 4-digit Fax Access
Code is registered, no one can operate the machine without entering the correct access code.
Automatic Receiving, however, is always available. After you complete any operation, such as mode setting or
transmission, and the display returns to standby, you have to reenter the access code in order to use the machine
again. Registering the Fax Access Code does not affect the use of the machine in any other way.
Setting the Fax Access Code
1
C FUNCTION
SET MODE (1-5)
ENTER NO. OR A V
2
3
SET
FAX PARAMETER(01-53)
NO.=|
38 FAX ACCESS CODE
nil
5
Enter a 4-digit Fax Access Code.
Ex: [Il[2][3][4]
SET
® STOP
m
38 FAX ACCESS CODE
1234
m
LI Not 0 : To erase the Fax Access Code, enter Access Code and press I SET 1 and follow the procedure above
to step 3, then press i CLEAR 11 SET I and I STOP I ,
Operating Your Machine with Fax Access Code
Enter the Fax Access Code.
1
2
Ex: [US]®a]
SET
Now you can operate the machine using normal
procedures.
08-DEC-1993 15;00
ACCESS CODE=|
08-DEC-1993 15:00
ACCESS CODE=1234
08-DEC-1993 15:00
00%
82