Panasonic Panafax UF-322 - Manual (Page 44)

SBadinS ^Qcu^ots
Manual Number Dialling (ADF Transmission)
To dial the telephone number manually, follow the steps below.
1
Set document(s) face down.
DOCUMENT SET
ENTER STATION 00%
2 MEMORY
a I I
Make sure that the lamp is off. If not, press 1 MEMORYl
tosef'or.
3
4
Enter a telephone number from the keypad.
Ex: [HE11I1IT1I21S1S]
O START
Your machine starts to dial the telephone number.
PRESS START TO DIAL
55512341
* DIALLING *
------- fOrr;-------
55512341
m Note: 1. If you need a special access number to get an outside line, dial it first then press I PAUSE I to enter a
pause (represented by a before dialling the full number.
Ex: 9 PAUSE 5551234
2. If you are using Pulse dialling and you wish to change to Tone dialling in the middle of dialling, press
I TONE I (represented by a T).
The dialling mode will be changed from Pulse to Tone after dialling the digit T.
3. To stop the transmission, press i STOP I,
The display shows;
COMMUNICATION STOP?
1:YES 2:NO
Press [T] to stop the transmission.
4. If you hear the voice of the other party through the monitor speaker after fast step, lift the handset of
vour external telephone and press \ STOP I and[T] to stop the communication. Vien press
I STOP I to stop the alarm. Vi^en you hear the beep after telling the other party to prepare to receive
the document, press I START I
to start fax communication.
44