Auto program, Ntsc tuner operations – Panasonic TU-DST51 User Manual
Page 59
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
S
pecial
F
eatures
NTSC TUNER OPERATIONS
This STB has a separate NTSC tuner. The NTSC output can be displayed on a
monitor with composite video inputs.
Main Menu
Press the NTSC button on the Remote control. Press the ACTION button on the
remote control to display the MAIN MENU. Press the A or ▼ arrow to navigate in the
MAIN MENU. To exit the MAIN MENU, select EXIT and press the ACTION button.
MAIN MENU
AUTO PROGRAM
MANUAL PROGRAM
CLOSED CAPTION
ANTENNA SOURCE
CHANNEL CAPTION
AUDIO SETUP
AUTO PROGRAM
Choose AUTO PROGRAM to automatically program all the available NTSC channels
with signals into the memory.
Procedure
□
Press the NTSC button on the remote control.
□
Press the ACTION button to display the MAIN MENU.
□
Press
A
or
T
arrow on the remote control to select AUTO PROGRAM,
□
Press the ACTION button to start Auto Program,
Note:
When the auto programming is completed, the MAIN MENU will be displayed with
MANUAL PROGRAM highlighted.
MAIN MENU
AUTO
PROGRAM
MANUAL
PROGRAM
CLOSED
CAPTION
ANTENNA
SOURCE
CHANNEL
CAPTION
AUDIO SETUP