Panasonic TU-DST51 User Manual

Page 23

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

etting

tarted

Step 3b. Digital TV/Standard TV Reception with Conventional TV

Folfow this diagram if you have a conventional TV, no cable service and you want to
receive digital channels through the STB and standard channels through the TV. An
additional antenna may be required depending on which frequencies your current
antenna can receive.

NOTE;

ANTENNA,

SPLITTER.

CABLES.

VIDEO

AND

AUDIO

CABLES

NOT INCLUDED

DIGITAL TV/STANDARD TV RECEPTION WITH CONVENTIONAL TV

SETUP

Procedure

•

Move the output mode switch to the NTSC position.

•

Connect the antenna cable to the splitter.

•

Connect the splitter outputs to the STB and TV ANT (antenna) jacks using standard RF

cables with coaxial connectors.

•

Follow directions in Getting Started section to connect the STB to a conventional TV.