Procedure, Optional connections, Dolby digital ac-3 decoder setup – Panasonic TU-DST51 User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
O
ptional
C
onnections
Optional Connections
Set-Top Box Connection to Dolby Digital AC-3 Decoder
Follow this diagram to connect the STB to a Dolby Digital AC-3 decoder.
Incoming signal
from antenna or
cable
Dolby Digital
AC-3 Decoder
1
1
DIGITAL
! 6-Channet Amplifier | .
1
AUDIO IN
(AC-3)
i & Speakers
1 1
1
1
NOTE: AC-3 DECODER AND DIGITAL
AUDIO CABLE NOT INCLUDED
1
1
1
% 1
V
!
DIGITAL TV
INPUT
f- - - - - - - - - 1
1
DOLBY DIGITAL AC-3 DECODER SETUP
Procedure
•
Connect Digital Audio cable from the Digital Audio Out connection on the STB to the Digital
Audio In connection on the Dolby Digital AC-3 decoder.
•
If using a DTV-compatib!e TV, follow directions in Getting Started section to connect the
STB to a DTV-compatible TV.
•
If using a conventional TV, follow directions in Getting Started section to connect the STB to
a conventional TV.