Panasonic TU-DST51 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
G
etting
S
tarted
Step 3d. Digital TV/Cable Reception with Conventional TV
Follow this diagram if you have a conventional TV, cable service and you want to
receive digital channels through the STB and cable channels through the cable box
{or through the TV if you have no cable box.
Optional Cable Box
NOTE:
ANTENNA, CABLE BOX, RF
CABLE, VIDEO AND AUDIO CABLES NOT
INCLUDED
DIGITAL TV/CABLE RECEPTION WITH CONVENTIONAL TV SETUP
Procedure
•
Move the output mode switch to the NTSC position.
•
Connect the antenna cable to the STB ATSC/DTV input jack.
•
If using a cable box, connect the cable wire from the wall jack to the cable box ANT
(antenna) IN jack using a standard RF cable with coaxial connector. Connect the cable box
ANT (antenna) OUT jack to the TV ANT (antenna) IN jack using a RF cable.
•
If not using a cable box, connect the cable wire from the wall jack to the TV ANT (antenna)
IN jack using a RF cable (not shown).
•
Follow directions in Getting Started section to connect the STB to a conventional TV.