DVR systems NVR60xx Series - Manual (Page 31)

Note: Dual-NIC is only supported in NVR-6064. And for NVR-5816P8/7632P8series NVR, the internal
NIC IPv4 address should be configured for the cameras connecting to the PoE network interface of the NVR.
7. Click Next button after you configured the network parameters, which takes you to the HDD Management
window, shown in Figure 2. 6.
Figure 2. 6 HDD Management
8. To initialize the HDD, click the Init button. Initialization removes all the data saved in the HDD.
9. Click Next button. You enter the Adding IP Camera interface.
10. Click Search to find online IP Camera. Select the IP camera to be added, and click the Add button.
Figure 2. 7 Search for IP Cameras
11.
Click Next button. Configure the recording for the searched IP Cameras.