DVR systems NVR60xx Series - Manual (Page 188)

13.5.3 Editing a User
Steps:
1. Enter the User Management interface.
Menu >Configuration>User
2. Select the user to be edited from the list, as shown in Figure 13. 9.
3. Click the icon to enter the Edit User interface, as shown in Figure 13. 10.
Note: The admin user can also be edited.
Operator and Guest
Admin
Figure 13. 10 Edit User Interface
4. Edit the corresponding parameters.
•
Operator and Guest
You can edit the user information, including user name, password, permission level and MAC address.
Check the checkbox of Change Password if you want to change the password, and input the new one in
the text field of Password and Confirm.
•
Admin
You are only allowed to edit password and MAC address. Check the checkbox of Change Password if
you want to change the password, and the input the correct old password, and the new one in the text field
of Password and Confirm.
5. Click the OK button to save the settings and exit the menu.