DVR systems NVR60xx Series - Manual (Page 182)

13.2 Configuring General Settings
Purpose:
You can configure the BNC output standard, VGA output resolution, mouse pointer speed through the Menu >
Configuration > General interface.
Steps:
1. Enter the General Settings interface.
Menu >Configuration> General
2. Select the General tab.
Figure 13. 2 General Settings Interface
3. Configure the following settings:
•
Language: The default language used is English.
•
CVBS Output Standard: Select the CVBS output standard to NTSC or PAL, which must be the
same with the video input standard.
•
VGA Resolution: Select the VGA output resolution, which must be the same with the resolution
of the monitor screen.
•
HDMI Resolution: Select the HDMI resolution, which must be the same with the resolution of the
monitor screen.
•
Time Zone: Select the time zone.
•
Date Format: Select the date format.
•
System Date: Select the system date.
•
System Time: Select the system time.
•
Mouse Pointer Speed: Set the speed of mouse pointer; 4 levels are configurable.
•
Enable Wizard: Enable/disable the Wizard when the device starts up.
•
Enable Password: Enable/disable the use of the login password.
4. Click the Apply button to save the settings.