Dillon Quick-Check Wire Tension Meter (Red) - Manual (Page 21)

Quick-Check Red User Instructions 21
Comm Port:
This allows you to choose where to export the "ON PRINT" logged
data.
a. Cell = Setup Cell for data export (4 pin Lemo)
b. Com1 = Not used
c. RADIO = Future development
d. Disabled = to turn off
Multi Leg / Wire: This is used to measure tension on tower guyed wires.
The readings can be stored (refer to page
18 ).
Max Legs:
Enter the number of legs the tower has.
Max Wires:
Enter the number of guy wires each leg has.
Comm Port:
This allows you to choose where to export the "ON PRINT" logged
data.
a. Cell = Setup Cell for data export (4 pin Lemo)
b. COM1 = Not used
c. RADIO = Future development
d. Disabled = to turn off