Dillon Quick-Check Wire Tension Meter (Red) - Manual (Page 13)

Quick-Check Red User Instructions 13
2.4.2 External Power Supply
Plug the 4-pin end of the power supply cable into the Quick Check 4-pin connector
located on the side of the unit. Plug the power supply adapter into an AC power outlet.
Refer to
Figure 2.4 for a photo of the external power supply.
Figure 2.4 External Power Supply Connection
Figure 2.5 External Power Supply (EDX PSU) (120 - 240 VAC 50 - 60 Hz)