Dillon GTX Plus Force Gauge - Manual (Page 5)

GTX-Plus Series User’s Manual REV 2.1 5
Using the GTX
Fitting Accessories
Couple fittings directly to the load cell stem or use an extension
rod. The threads are 10-32 in capacities up to 1000 N, and 5/16-18 in
the 2500 N capacity.
Ensure that fixturing does not contact the force gauge case.
Ensure that anything coupled to the gauge is screwed finger-tight
only. Excessive torque can damage the load cell and is not covered by
warranty.
Mounting to Test Stand
The two 10-32 threaded holes on the rear of the gauge can be
used for mounting the gauge. The distance between the holes is 2.25
inch. A versatile stand mounting plate is available to couple the force
gauge to many brands of test stands.
Powering up
As show in Figure 1 the control panel has eight keys.
Figure 1 GTX control panel
To power up the gauge press the ON/OFF key. A short self-test
runs during which the display will show the capacity in Newtons.