Dillon GTX Plus Force Gauge User Manual
Page 18
GTX-Plus Series User’s Manual REV 2.1
18
Use LEFT ARROW keys to move cursor point to the desired value.
Use UP and DOWN keys to change the value, press and hold to scroll
values. Use RIGHT ARROW key to change the unit. Press ENTER to save
setting and return to Setup menu page.
1.7) LOAD DEFAULT The GTX may be returned to its original
factory default setting.
To set factory default, Press UP and DOWN to move the cursor
point to LOAD DEFAULT and press ENTER key the display will show Load
Default menu page. Press ESC key to return to the setup menu page.
LOAD DEFAULT
AUTO-OFF = OFF
LOWER LEVEL = 0 %
UPPER LEVEL = 0 %
PERCENT DROP = 0%
FILTERING = HIGH
AUTO AVERAGING = OFF
Figure 14 Load default Menu
Press ENTER key to Load default setting and return to setup
menu page.