Dillon GTX Plus Force Gauge User Manual
Page 15
GTX-Plus Series User’s Manual REV 2.1
15
1.4) FILTERING This function selects the display throughput
rate i.e. the amount of averaging performed by the internal electronics
before the load reading is displayed. There are two levels HIGH and LOW
LOW Display update every 100 ms with a little data averaging.
HIGH Display update every 200 ms with a maximum data
averaging.
To set FILTERING, Press UP and DOWN to move the cursor point
to FILTERING and press ENTER key the display will show Filtering menu
page. Press ESC key to return the setup menu page.
FILTERING MENU
1) LOW
2) HIGH
Figure 10 Filtering Menu
Using UP and DOWN keys select the relevant level and press
ENTER key to save setting and return to setup menu page.
1.5) CUSTOM UNIT A custom unit can be applied to the load
values in the main display. This is useful for applications where you wish
to convert the load reading into a non-standard unit of measurement.
To
set
CUSTOM UNIT, Press UP and DOWN to move the cursor
point to CUSTOM UNIT and press ENTER key the display will show
Custom unit menu page. Press ESC key to return the setup menu page.
CUSTOM UNIT MENU
NAME = Cust
FACTOR = 01.000 N
WARNING All Database
will be deleted.
Figure 11 Custom unit Menu
To set the name, Use LEFT ARROW key to move the cursor point
to NAME. Use UP and DOWN keys to change the character, press and
hold to scroll change.