beautypg.com

Dillon GTX Plus Force Gauge User Manual

Page 16

background image

GTX-Plus Series User’s Manual REV 2.1

16

To set the constant factor, Use LEFT ARROW key to move the

cursor point to FACTOR constant. Use UP and DOWN keys to change the

value, press and hold to scroll values.

To set the unit factor, Use RIGHT ARROW key to change the unit,

press and hold to scroll change.

Press ENTER to save setting and return to setup menu page.


*All Data in Database will be deleted if you change setting.

1.6) AUTO AVERAGING This function allows the average load

reading to be displayed. The average starts being calculated when the
start trigger condition occur and stops when the stop trigger condition

occur. When this feature is Enabled, one addition Measure mode can be

selected using the MODE key from the main display.

averaging mode

symbol

Stop Timer (secs)

averaging value

Figure 12 Auto Averaging mode

*In this mode save database by press ENTER key for 0.5 sec

To access AUTO AVERAGING menu, Press UP and DOWN to move

the cursor point to AUTO AVERAGING and press the ENTER key the

display will show the Pass-Fail menu page. Press ESC key to return the

setup menu page.

AUTO AVERAGING MENU

1) START,STOP OPTION

2) SETTING



Figure 13 Auto Averaging Menu


1.6.1) START,STOP OPTION This function selects the Auto

Averaging start and stop option.

To access START,STOP OPTION menu, Press UP and DOWN to

move the cursor point to START,STOP OPTION and press ENTER key the