CANOGA PERKINS 9161 Network Interface Device - Manual (Page 42)

9161 Network Interface Device User’s Manual Using the Software
Managing the Network Interface
30
3. To view or update parameters for a specific port, type 10 , View/Change Interface, and
press , then press to cycle through the port names. You can edit vari-
ous parameters, such as Admin Mode, Priority, Path Cost, and Edge Port.
4. To return to the Switch Configuration menu, press .
3.5.3 Set Up VLANs
Use the VLAN Configuration screen to view and set VLAN parameters for the 9161. To access
the VLAN Configuration screen, follow these steps:
1. From the Switch Configuration menu, type 5, VLAN Configuration, and press .
2. At the VLAN Configuration screen, type 1 to add a VLAN or type 2 to view or edit VLAN
information and press , then follow the prompts on the screen. You can view a
specific port or set the VLAN Name, up to 20 characters.
3. At the VLAN Configuration screen, to view a part of the VLAN list that does not appear on
the screen, type 4 , then enter the number of the VLAN where you want to start viewing
the list.
4. To set up ID translation for a specific port, type 5 , then press to select that port;
and follow the prompts on the SPx VLAN ID Translation screen.
5. To set up Priority translation for a specific port, type 6 , then press to select that
port; and follow the prompts on the SPx VLAN Priority Translation screen.
6. To remove a VLAN, type 3 and press , then type or select the VLAN number.
7. To set up VLAN information for a specific port, type 7 , then press to select that
port; and set values for these parameters on the SPx Information screen:
• Participation Include/Exclude/Auto: Select specific numbers of VLANs that this
port will Include (always), Exclude (never), or Auto (dynamically) participate in
• Tagging Enable/Disable: Enable, allow tags to remain on packets as they exit the
9161; or Disable, strip tags from packets before they exit the 9161
• Double Tagging Enable/Disable: Enable, add service provider ID tags to packets
as they exit the 9161; or Disable, strip service provider ID tags from packets
before they exit the 9161
• Accept Frame: Accept frames for this VLAN Only or Accept All frames
• Ingress Filter: Enable, filter out received frames that are not for this VLAN, or Dis-
able, forward all received frames.
• PVID: Enter the VLAN ID to be assigned to any received untagged or priority
tagged frames
• Default User Priority: Set the priority for any tagged packets received at this port
8. At the VLAN x Information screen, you can view or update parameters for a specific
VLAN. Type 2 , View/Change Interface, and press . You can edit various param-
eters, such as Admin Mode, Priority, Path Cost, and Edge Port.
9. To return to the Switch Configuration menu, press .