CANOGA PERKINS 9161 Network Interface Device - Manual (Page 36)

9161 Network Interface Device User’s Manual Using the Software
Managing Security
24
4. To delete a user, type 3 , then follow the prompts to select the user name and confirm the
choice; the User Accounts screen reappears.
5. To return to the Systems menu, press .
3.4.3 Change Your Password
Whether you have supervisor, operator, or observer access, you can update your password for
the domain in order to maintain system security. You cannot change the password for any other
users. To update your password, follow these steps:
1. At the Main Menu, type 1, System, and press .
2. At the System menu, type 7, Account Configuration, and press . The User
Accounts screen appears.
3. To add a user, type 2, or to edit an existing user, type 1, and press , then type the
Username and follow the prompts on the Edit User Account screen to enter values or
press to cycle through options for these parameters:
4. To change your password, type 1, and press , then select your account User
name.
5. On the Edit User Account screen, type 5, UI Password, and enter your new password, 8
to 15 characters, and press .
6. To return to the Main Menu, press .
3.4.4 Manage Logged In Users
At times, you may need to monitor which users are currently logged in to the 9161 and, if needed,
you can force a specific session off (requires supervisor access). The User Log shows informa-
tion about the current users by session number; an asterisk (*) next to the session number indi-
cates your session. To access the User Log, follow these steps:
1. From the Main menu, type 4, Reports, and press .
2. From the Reports menu, type 5, User Log, and press .
3. To force a session off, type the number for that session and press .
NOTE: Although a user with any level of access can view the information, a
user must have supervisor access to force a session off.
4. To return to the Main Menu, press .