CANOGA PERKINS 9161 Network Interface Device - Manual (Page 30)

9161 Network Interface Device User’s Manual Using the Software
Managing the 9161
18
To set up synchronization with SNTP, follow these steps:
1. At the System menu, type 10 , SNTP Configuration and press .
2. At the SNTP Client Configuration screen, type the number for a parameter and press
, then follow the prompts on the screen.
• SNTP Enable: Enable (yes) or disable (no) synchronized time
• SNTP Server IP Address: Enter the address for the server; 0.0.0.0 indicates no
server
• Time Resync Interval in hours: Set how often, in hours, that the 9161 tries to syn-
chronize its time to the Sntp server; Range is 0 (attempt to synchronize at bootup,
only) to 24 (once daily)
• Offset from GMT in hours: Set the difference, in hours, between this 9161 and
Greenwich Mean Time (GMT), which is similar to Coordinated Universal Time
(UTC); Range is -12 to 12
• Summertime: Enable (yes) or disable (no) Daylight Saving Time
3. To return to the System menu, press .
To directly set the date and time, follow these steps:
1. From the Main Menu, type 6, Utilities, and press .
2. At the Utilities menu, type 1 , Set Date and Time and press .
3. At the prompt to enter the current date and time, type the current information in DD/MM/
YYYY HH:MM format.
4. To return to the Main Menu, press .
3.3.4 Manage SNMP and Host Access
To set values for basic system parameters, including some parameters used by SNMP, go to the
IP Settings screen and follow these steps:
1. From the System menu type 3 , IP Settings, and press .
2. At the IP Settings screen, type the number for an item and press , then enter data
or press to cycle through the options and press to select an option.
• Local IP Address: Set the IP address for this 9161
• Subnet Mask: Mask that sets the network ID part of the IP address
• Gateway IP Address: Address of the network node that connects to another net-
work
• Enable BOOTP Mode: Enable or disable BOOTP requests
• Management VLAN Id: Set the number for the VLAN