CANOGA PERKINS 6703 CWDM Transponder - Manual (Page 29)

EdgeAccess Universal Chassis System
2. Save the Notepad document with a .SCP file extension in the folder where the Dialup Connection
application looks for scripts. The script will be available in the Dialup script menu. This file is
typically in the Windows\System32\ras\ folder.
3. To run the script, reach the Phonebook Entry dropdown menu and select either the PPP or the
SLIP script.
3.9.3 Switch to PPP or SLIP Mode Without a Script
If you do not have a script file, and dial-up networking initializes a VT100 terminal screen, you will
not see the screens, but the 6703 responds to the commands normally. Follow these steps:
1. After dialing, enter the password.
2. Type 1 to access the System Configuration screen.
3. Type 4 to access the SNMP Configuration screen.
4. Type 11 to highlight the Serial Port Configuration line.
5. Press once to select SLIP or twice to select PPP.
6. Press to confirm the choice for port configuration.
You can now run TCP/IP applications.
3.10 The Canoga Perkins MIB
The Canoga Perkins private MIB provides fully managed access to configuration features, status
reports and diagnostics. The private MIB is required for defining and indexing objects that will be
recognized by the SNMP management system.
All major components of the modules monitored by the SNMP network are assigned index numbers,
defined in a tree hierarchy. The index allows the SNMP manager to precisely identify each
component (and other objects defined by the MIB file) when reporting module status.
You can download the private MIB, called "cp.mib," from the Canoga Perkins web site. This file
must be compiled. The SNMP software on your system probably provides a feature to compile a
MIB; for details, see the documentation for your PC.
CWDM Transponder Model 6703 3-17