beautypg.com

CANOGA PERKINS 9135G SNMP Managed Gigabit Ethernet Switch User Manual

Page 52

background image

EdgeAccess Ethernet Switch

Step 11 In the Dial-Up Networking window, check that the new properties are correct, then plug a

phone line into the computer modem and click Dial to connect to the remote 9135G.


9135G


















Figure 47. Initialize Dial-Up to Remote 9135G.


Step 12 From the Windows Start button, click Programs, then DOS Commands Prompt. In the

MSDOS screen, type "ping" and the IP address of the 9135G. Reference Figure 48. The Ping
Program normally stops after three pings.

Figure 48. Confirm SLIP Connection



Step 13 In MSDOS, type "telnet" to open a Telnet session. The Telnet screen appears as shown in

Figure 49.

Model 9135G SNMP Managed Gigabit Ethernet Switch

4-8

See also other documents in the category CANOGA PERKINS Computer hardware: