CANOGA PERKINS 9135G SNMP Managed Gigabit Ethernet Switch - Manual (Page 28)

EdgeAccess Ethernet Switch
MENU and SELECTION MINIMUM ACCESS LEVEL
SLIP Port Setup Menu
Baud
Rate Supervisor
Parity Supervisor
Stop Bits Supervisor
Flow Control Supervisor
Global Spanning Tree Parameters Menu
Enable
Spanning Tree Supervisor
Priority Supervisor
Hello Time (sec) Supervisor
Forward Delay (sec) Supervisor
Max Age (sec) Supervisor
Port l Spanning Tree Parameters Menu
Priority Supervisor
Path Cost Supervisor
Port n Information Menu
Port
Enable Supervisor
Port Description Manager
Remote Fault Enable Supervisor
Port n Details Menu
Clear
Counters User
Traps Log Menu
View
Previous Page User
View Next Page User
Clear the log Supervisor
Fdb Log Menu
View
Previous Page User
View Next Page User
Ping Menu
Ping
Address User
Ping Count User
Start Pinging User
3.2.1.5 Network Name
To name the network where the 9135G resides, choose selection "5" or "Network Name." The prompt
to enter a name appears on the bottom of the menu; enter a name up to 20 characters.
3.2.2 Switch Configuration
To set up the Switch configuration, select "2" or "Switch Configuration" and press . The
Switch Configuration screen appears. Reference Figure 20.
Model 9135G SNMP Managed Gigabit Ethernet Switch 3-12