Figure 17. host table / snmp settings -8 – CANOGA PERKINS 9135G SNMP Managed Gigabit Ethernet Switch User Manual

Page 24

Text mode
Original mode

EdgeAccess Ethernet Switch

Figure 17. Host Table / SNMP Settings

Items 1-8:

•

To add an IP address to the Host Table or change SNMP Settings, select a number from 1 to 8.
Type the IP address to change or add and press .

•

To set the Access, press . To toggle through the options for Telnet, SNMP, or both, press
the , then press to set an option.

•

To set the SNMP Access Level, press . To toggle through the read, write, and trap options,
press the , then press to set an option.

•

To set the trap community, select "9," type in the Read Community, and press to accept.
Next, select "10," type in the Write Community, and press to accept.

•

To set the Trap Port, enter the destination port number for management traps. Default is 162.

Note: The write community name cannot be changed.

Model 9135G SNMP Managed Gigabit Ethernet Switch

3-8