CANOGA PERKINS L351 10/100BASE Media Converter - Manual (Page 61)

EdgeAccess Universal Chassis System
4.10.2 Static ARP Table
Use the Static ARP Table to set specific IP and MAC addresses for up to 10 ports. See Figure 4-34.
To use view, set, or remove an address, follow these steps:
1. From the Main Menu, type 7 , Utilities, and press .
2. From the Utilities menu, type 8 , Static ARP Table, and press .
3. At the prompt, type 1 to add an entry or 2 to remove an entry, and follow the prompts.
4. To return to the Utilities menu, press .
-------------------------------STATIC ARP TABLE-----------------------
IP Address MAC Address
---------- -----------
172.16.2.7 00-90-37-56-6C-34
172.16.3.23 00-7C-25-33-57-9C
Add or Delete an entry (1=Add, 2=Delete from table):
-------------------------------Messages-------------------------------
Figure 4-34. Static ARP Table Screen
4.10.3 Dynamic ARP Table
Use the Dynamic ARP Table to view the currently assigned IP and MAC addresses for various ports.
See Figure 4-35. To use view an address, follow these steps:
1. From the Main Menu, type 7, Utilities, and press .
2. From the Utilities menu, type 9, Dynamic ARP Table, and press .
3. To return to the Utilities menu, press .
-------------------------------DYNAMIC ARP TABLE----------------------
IP Address MAC Address IP Address MAC Address
---------- ----------- ---------- -----------
172.16.2.7 00-90-37-56-6C-34
172.16.3.23 00-7C-25-33-57-9C
Press Enter to Delete an entry
Figure 4-35. Dynamic ARP Table Screen
L351 10/100BASE Media Converter 4-37