7 link status screen, Link status screen -33, Figure 4-28. latency/jitter test screen -33 – CANOGA PERKINS L351 10/100BASE Media Converter User Manual
Page 57: Figure 4-29. link status screen -33
EdgeAccess Universal Chassis System
---------------------------REMOTE LATENCY/JITTER TEST-----------------
Test IP Addr/VLAN 0.0.0.0/0 Round Trip Packets 0
Test Duration 00:00 Dropped Packets 0
Minimum Latency (ms) 0.000000 Minimum Jitter (ms)
0.000000
Average Latency (ms) 0.000000 Average Jitter (ms)
0.000000
Maximum Latency (ms) 0.000000 Maximum Jitter (ms)
0.000000
(1) To IP Addr 0.0.0.0 (5) DF Bit Clear
(2) From IP Addr Auto Selection (6) DSCP Precedence Best
Effort
(3) Test VLAN 0 Drop Probability Not
Used
(4) Test Packets per sec 1 (7) Test Packet Priority (0-
7) 0
(8) Test Duration min:sec (0=forever) 0
(9) Min Test Payload Size (40 - 1954) 40
(10) Max Test Payload Size (40 - 1954) 40
(11) Test Packet Timeout sec (1 - 10) 3
Figure 4-28. Latency/Jitter Test Screen
4.7
Link Status Screen
Use the Link Status screen to view the current link conditions on the L351. See Figure 4-29. To
view link status, follow these steps:
1. From the Main Menu, type 3, Link Status, and press
appears.
2. When you finish checking the Link Status, press
-----------------------------LINK STATUS------------------------------
Local Remote 9145
Chassis Standalone
Slot N/A
User Port Link Down Link Down
Extension Port Link Up Link Up
SFP Status:
User SFP Rx Power N/A N/A
User SFP Tx Power N/A N/A
Extension SFP Rx Power N/A N/A
Extension SFP Tx Power N/A N/A
Link Loss From Local Ext Tx To Remote Ext Rx N/A
Link Loss From Remote Ext Tx To Local Ext Rx N/A
Press ESC to return to previous screen
-------------------------------Messages-------------------------------
Figure 4-29. Link Status Screen
L351 10/100BASE Media Converter
4-33