CANOGA PERKINS L351 10/100BASE Media Converter - Manual (Page 55)

EdgeAccess Universal Chassis System
4.6 Diagnostics Menu
Use the Diagnostics menu for troubleshooting the L351; you can view current loopback conditions
and set up loopback. See Figure 4-26. For details about using loopback, reference Chapter 3. To use
the Diagnostics, follow these steps:
1. From the Main Menu, type 2, Diagnostics, and press . The Diagnostics menu
appears.
2. Type the number for the test option you want, and press .
3. When you finish running diagnostic tests, press to return to the Main Menu.
---------------------------------DIAGNOSTICS--------------------------
1) Loopback Setup
2) Remote Latency/Jitter Test
Select [1-2]:
-------------------------------Messages-------------------------------
Figure 4-26. Diagnostics Menu
4.6.1 Loopback Setup
Use the Loopback Setup report and menu to view current loopback conditions and set up loopback for
troubleshooting the L351. See Figure 4-27 and Table 4-11. For details about using loopback,
reference Chapter 3. To run a loopback test, follow these steps:
1. From the Diagnostics menu, type 1 , Loopback Setup, and press . The Loopback
Setup screen appears.
2. Type the number for the loopback option you want to set, press to highlight the
Remote column if needed, press to cycle through the options, and press .
3. When you finish running Loopback, press to return to the Diagnostics menu.
L351 10/100BASE Media Converter 4-31