CANOGA PERKINS L351 10/100BASE Media Converter - Manual (Page 53)

EdgeAccess Universal Chassis System
Table 4-9. SNTP Client Configuration Option Definitions
Menu Item Description
1. Sntp Client UTP
Offset
Set the difference, in hours, between this 9145 and Coordinated
Universal Time (UTC), which is similar to Greenwich Mean Time
(GMT); Range is -12 to 12
2. Sntp Client
Observe DST
Enables/Disables Daylight Savings Time (Summer Time)
Sntp Client DST
Starts At Sets the date and time DST starts
Sntp Client DST
Ends at Sets the date and time DST starts and ends
3. Sntp Client Sync
Interval
Sets how often, in minutes, that the 9145 tries to synchronize its time
to the SNTP server; Range is 0 (attempt to synchronize at bootup,
only) to 1440 (once daily)
4. Sntp Server IP
Address
Sets the address for the main SNTP server. 0.0.0.0 indicates no server
Sntp Server
Retries
Sets how many times the L351 tries to synchronize before trying the
alternate server or giving up. Range is 0 to 10
Sntp Server
Timeout
Wait period between unsuccessful attempts. Range is 1 to 30
Sntp Server
Priority
Set which server to contact first. Range is 1 to 255 with 1 the highest
priority and 255 the lowest. If the priority is the same for the two
servers, the L351 alternates tries between the servers
5. Sntp Server IP
Address
Sets the address for the alternate SNTP server. 0.0.0.0 indicates no
server
Sntp Server
Retries
Sets how many times the L351 tries to synchronize before returning to
the main server or giving up. Range is 0 to 10
Sntp Server
Timeout
Wait period between unsuccessful attempts. Range is 1 to 30
Sntp Server
Priority
Set which server to contact first. Range is 1 to 255 with 1 the highest
priority and 255 the lowest. If the priority is the same for the two
servers, the L351 alternates tries between the servers
L351 10/100BASE Media Converter 4-29