CANOGA PERKINS 1502 Domain Management Module - Manual (Page 23)

EdgeAccess Universal Chassis System
3. At the Security Configuration screen, type the number for an item and press , then
type a value or press to cycle through the options and press to select the
value or option.
• Minimum Length/Minimum Alpha Characters/Minimum Numeric Characters/Minimum
Punctuation Characters/Maximum Consecutive Character Types/Maximum Same Character:
Define characteristics of passwords; the range for all fields is from 0 through 15
• Allow Username in Password: Enable or disable the username appearing as or within the
password
• Password Expiration Time: Set how often in days, 1 through 365, that the passwords must be
reset; 0 = disabled
• Password Reuse Count: Set whether the password must be changed or can be used again
immediately; values are 0 (new password can be the same) or 1 (new password must be
different)
• Lockout After Failed Attempts: Set how many times, from 1 to 10, that a user can try to log
in before a lockout; 0 = disabled
• Lockout Type/Lockout Time: Set the type and length of lockout
• Hard requires another user with Supervisor access to unlock the account on the User
Accounts screen
• Timed requires that the user wait for Lockout time before trying again
• Lockout Time is from 0 (none) to 30 minutes
• Display Lockout Message/Lockout Message: Enable or disable and set the message, up to 30
characters, that appears at lockout
• Lockout Craft Port: Disable access to the serial port to prevent any unauthorized access; to
re-enable the craft port, run a Telnet session
• Inactivity Logout Time: Set the time, between 1 and 30 minutes, before automatic log-out
with no activity; 0 = disabled
Set Up and Manage a User Account
You can set up an account for a user, whether another supervisor, operator, or observer, to access
the DMM. You can also update or delete usernames or permissions. To manage a user account,
access the User Accounts screen and follow these steps:
1. At the Domain Management Module menu, type 2 , "Change Security & Passwords," and
press . The Change Security & Passwords menu appears.
2. At the Change Security & Passwords menu, type 2 , "User Accounts Configuration," and
press .
Model 1502 Domain Management Module 3-13