CANOGA PERKINS 1502 Domain Management Module - Manual (Page 19)

EdgeAccess Universal Chassis System
• Enter the values for primary and alternate SNTP servers:
• IP Address: Set the address for the server; 0.0.0.0 indicates no server
• Retries: How many times the DMM tries to synchronize before trying the alternate
server or giving up; Range is 0 to 10
• Timeout (seconds): How long between unsuccessful attempts; Range is 1 to 30
• Priority: Set which server to contact first; Range is 1 to 255 with higher priority for the
lower number; if priority is the same for two servers, the DMM alternates tries between
the servers
3. To return to the Domain Management Module menu, press .
To directly set the date and time, follow these steps:
1. At the Domain Management Module menu, type 9 , "Set Date and Time" and press .
2. At the prompt to enter the current date and time, type the current information in
DD/MM/YYYY HH:MM format.
3. To return to the Domain Management Module menu, press .
Note: Because the Clock circuit exerts a large power drain on the lithium battery in the DMM,
the Clock may lose time when the power is off or the DMM is out of the chassis. Reset
the date and time whenever you install the DMM in the chassis or turn the power on.
Set Up the Modem/SLIP/PPP Parameters
Although the default values for the serial communication parameters meet requirements for most
systems, you may need to update them for a particular situation; use the Modem/SLIP/PPP
Configuration menu to update the serial communication parameters. To access the
Modem/SLIP/PPP Configuration menu, follow these steps:
1. At the Domain Management menu, type 8 , "Modem/SLIP/PPP Configuration," and press
. The Modem/SLIP/PPP menu appears.
2. To select the baud rate for the serial port, type 1 and press to cycle through the baud
rate options; options include 9600, 19200, 38400, 57600, or 115200 bps.
3. To enter a new Modem Initialization String, type 2 , type the new string, and press ;
the default string is " AT ".
Note: For details on a different initialization string, see the documentation for your modem.
4. To return to the Domain Management Module menu, press .
Model 1502 Domain Management Module 3-9