CANOGA PERKINS 1502 Domain Management Module - Manual (Page 14)

EdgeAccess Universal Chassis System
Login and DMM Main Menu
When you connect to the DMM through HyperTerminal or Telnet, the first screen is the DMM
Login Menu. To log in, follow these steps:
1. If this is your initial setup and no username or password has been set, type admin and press
at the prompt for the username. Otherwise, type your username and press .
2. At the prompt to enter your password, enter the password if one has been set; otherwise, type
admin and press . The DMM Main Menu screen appears.
The DMM Main menu provides management access to the DMM management functions, all
managed chassis, and all managed modules within the domain. See Table 2.
Table 2. DMM Main Menu Functions
Menu Item Description
1. Manage or access the Domain Management Module Set up the DMM, then manage it and system
security
2. Manage or access a specific Virtual Group Create, edit and/or delete Virtual Groups
3. Manage or access a specific Chassis View or configure any chassis in the domain
4. Manage or access a specific Module View or configure a specific module in a
specific chassis
5. Manage or access the CIM modules View the CIM and manage chassis alarms
6. Access Module Code Library Manage firmware for the domain
7. Alarm/System Log View a list of recent alarms, traps, and events
8. System Status View real time system status and static
parameters
9. Manage Logged In Users View and manage currently logged in users
10. Change Password Update the password as needed to maintain
system security
11. Logout Log out of this management session
3-4 Model 1502 Domain Management Module