Setting up your my eq profile – C. Crane WFR-28 FM-RDS User Manual

Page 70

Setting up your My EQ profile

If you find the preset equalizer functions not to your liking, you may set up a custom treble and

bass setting as follows:

1. Follow steps 1-2 in the previous section in order to enter the Equalizer menu.

. Rotate the

Tuning Control Rotary until 'My EQ profile setup' is highlighted on the display.

Press the

Tuning Control Rotary to enter the adjustment mode.

3. To adjust the bass level rotate the

Tuning Control Rotary until 'Bass' is highlighted on the

display. Press the

Tuning Control Rotary to enter the adjustment mode and rotate the Tuning

Control Rotary until the desired level (between -14 and +14) is displayed. The sound will change

as you adjust the level. Press the

Tuning Control Rotary when you are happy with the bass

setting.

4. To adjust the treble level rotate the

Tuning Control Rotary until 'Treble' is highlighted on the

display. Press the

Tuning Control Rotary to enter the adjustment mode and rotate the Tuning

Control Rotary until the desired level (between -14 and +14) is displayed. The sound will change

as you adjust the level. Press the

Tuning Control Rotary when you are happy with the treble

setting.

5. Press the

Back button and the display will prompt you to save the changes.

If you wish to save the changes highlight 'YES'. If you do not wish to save the changes highlight

'NO'. Press the

Tuning Control Rotary to enter the selection.

6. To use the 'My EQ' profile rotate the

Tuning Control Rotary until 'My EQ' is highlighted, and

then press the

Tuning Control Rotary to make the selection.

To quickly cancel the effect of the 'My EQ' profile rotate the

Tuning Control Rotary until 'Normal

'is highlighted on the display and press the

Tuning Control Rotary to select. The treble and

bass settings will be remembered for the next time that you wish to use the 'My EQ' setting.

SELECT

/SEEK

2-6

BACK