C. Crane WFR-28 FM-RDS - Manual (Page 65)

64
GB
Setting the alarm clock - cont.
7. Rotate the Tuning Control Rotary to highlight 'Enable' and press the Tuning Control Rotary.
The display will show the Frequency options for the alarm. The alarm frequency options are as
follows:
'Off' - the alarm will be disabled
'Daily' - the alarm will sound everyday
'Once' - the alarm will sound once
'Weekends' - the alarm will sound only at weekends
'Weekdays' - the alarm will sound on weekdays only
Rotate the Tuning Control Rotary to choose the required alarm frequency option. Choosing
Off will disable the alarm. Press the Tuning Control Rotary to confirm the selection.
If you choose to set the alarm to Once you will also need to set the date using the Tuning
Control Rotary.
8. The alarm can be set to buzzer, Internet radio, DAB radio, FM radio. For whichever radio mode
is selected, the radio alarm may be set to any of the stations which have been stored as presets
or to the station most recently listened to.
Rotate the Tuning Control Rotary to highlight the current 'Mode' option for the alarm, then press
the Tuning Control Rotary if you wish to change it.
Rotate the Tuning Control Rotary to highlight either 'Buzzer' or the required mode. Press the
Tuning Control Rotary to confirm the selection.
9. If setting the alarm to a radio option, rotate the Tuning Control Rotary to highlight the 'Preset:'
option then press the Tuning Control Rotary if you wish to change it.
Choose from either the radio station 'Last listened' to, or from the presets 1 - 5. Scroll to the
chosen option and press the Tuning Control Rotary to confirm the selection. Note that you
can only set the alarm to use a preset which has already been stored.
SELECT /SEEK
7-9