Scan setting – C. Crane WFR-28 FM-RDS User Manual

Page 57

Scan setting

When using the FM mode your radio can be set to either scan local stations or to scan all

stations including distant radio stations.

. Press the

Mode button as needed to select FM radio mode.

. Press the

Menu button to enter the FM menu.

. Rotate the

Tuning Control Rotary until 'Scan setting' is highlighted and then press the Tuning

Control Rotary to enter the scan adjustment mode. The current scan setting is indicated with

an asterisk.

4. To set your radio so that only the stations with the strongest signals are found during scanning

rotate Tuning Control Rotary until 'YES' is highlighted. Press the

Tuning Control Rotary to

confirm the setting. (Normally this will restrict scanning to local transmissions.)

Alternatively, to set your radio so that all available stations are found during scanning (local and

distant transmissions) rotate the Tuning Control Rotary until 'NO' is highlighted. Press the

Tuning

Control Rotary to confirm the setting.

MENU

MODE

SELECT

/SEEK

3,4