Dynamic range control setting – C. Crane WFR-28 FM-RDS User Manual

Page 51

Dynamic Range Control setting

Dynamic Range Control (also known as DRC) can make quieter sounds easier to hear when

your radio is used in a noisy environment by reducing the dynamic range of the audio signal.

. Press the

Standby button to switch on your radio.

. Press the

Mode button as needed to select DAB radio mode.

. Press the

Menu button to enter the DAB menu.

. Rotate the

Tuning Control Rotary until 'DRC' is highlighted on the display.

5. Press the

Tuning Control Rotary to enter the DRC adjustment mode. The current DRC

setting will be indicated with an asterisk.

6. Rotate the

Tuning Control Rotary to highlight the required DRC setting (the default is Off).

'DRC Off' - DRC is switched off, Broadcast DRC will be ignored.

'DRC high' - DRC is set as sent by broadcaster.

'DRC low' - DRC level is set to 1/2 that sent by broadcaster.

7. Press the

Tuning Control Rotary to confirm the setting.

Note: Not all DAB broadcasts use the DRC function. If the broadcast does not provide DRC

information, then the DRC setting in the radio will have no effect.

MENU

MODE

SELECT

/SEEK

4-7