Setting the alarm clock – C. Crane WFR-28 FM-RDS User Manual

Page 64

Setting the alarm clock

Your radio has two separate alarms which can be set to wake you to either the radio, USB or a

buzzer alarm. In the event of a power interruption your radio has built in memory that will retain

your alarm settings.

Ensure that the time is set correctly before setting the alarms.

. Press the

Menu button and rotate the Tuning Control Rotary until ‘Main menu’ is highlighted.

Press the

Tuning Control Rotary to enter the menu.

. Rotate the

Tuning Control Rotary until ‘Alarms’ is highlighted and the press the Tuning

Control Rotary to enter the selection.

. Rotate the

Tuning Control Rotary until the desired alarm (1 or 2) is highlighted on the display.

Press the

Tuning Control Rotary to enter alarm setup.

. Rotate the

Tuning Control Rotary until 'Time' is highlighted on the display. Press the Tuning

Control Rotary to adjust the alarm time.

5. Rotate the

Tuning Control Rotary to choose the alarm hour. Press the Tuning Control Rotary

to confirm the setting.

6. Rotate the

Tuning Control Rotary to choose the alarm minute.

Press the

Tuning Control Rotary to confirm the setting. The display will then return to the

alarm setting menu.

If the radio has been set to use a 12 hour clock format, there will also be an option here for

setting AM or PM for the alarm time.

MENU

SELECT

/SEEK

1-6