C. Crane WFR-28 FM-RDS - Manual (Page 16)

5
Network remote control options
Network Pin setup (Pin number)
Your radio has the option of being controlled by an application installed on an Apple iPhone, iPod
touch or iPod. The Pin number facility allows you to ensure that your radio can only be controlled by
your own Apple device rather than someone else’s.
Details of how this feature can be used with your iPhone or iPod touch are explained in the separate
section in this manual called ‘Using iSangean app for controlling your WFR-28 internet radio’.
Keep network connected
By default, your radio will shut down its WiFi connection when it is in standby. This minimizes power
consumption but it does mean that you will need to switch that radio on manually in order to use
either the ‘Play to’ function or any other remote control software.
If you need to be able to remotely control the radio even when it has been put into standby, then
you can choose to keep the network connected by using the ‘Keep connected’ option in the network
setting menu. In the standby mode display either the WiFi signal indicator is shown with or without a
cross through it according to the chosen network settings.
Keep network connect
Wlan region
Manual settings
Network PIN Setup
Network profile
>
>
Network settings
Keep network connect
Wlan region
Manual settings
Network PIN Setup
Network profile
>
>
Network settings
06/04/2011 06/04/2011