C. Crane WFR-28 FM-RDS User Manual

Page 45

Inserting and removing memory devices

1. Plug the USB memory devices into the rectangular slot on the top of the unit.

Note: the USB socket is upside down compared to those commonly found on PCs.

2. To select USB mode press the

Mode button until the Music Player mode is shown on the display.

Playing files from USB memory devices

1. Carefully insert the USB memory device into the USB slot. Press the

Standby button to switch

on the radio. The radio may detect the memory has been connected in which case it will ask

whether you wish to open the folder view of the memory contents. Press the

Tuning Control

Rotary to select ‘Yes’ and skip to step 4 below.

If the USB memory was not automatically detected, proceed as follows.

2. To select USB playback mode press the

Mode button as needed until Music Player mode is

selected.

. Rotate the

Tuning Control Rotary until ‘USB playback’ is highlighted on the display and press

the control. Your radio will now list the content stored on the USB memory device. If there are

many files or folders this may take a few seconds.

. Rotate the

Tuning Control Rotary to highlight the required folder and press the control to

enter the current folder. The list of tracks in the current folder will be displayed.

Alternatively, if you have nested folders (such as album folders within an artist folder) then you

will simply step to the next folder level.

5. Rotate the

Tuning Control Rotary to select the track and press the control to begin playing

from the highlighted track. All files in the current folder will then be played in turn.

Files are played in the order in which they exist in the filing system of the USB memory (they

are not sorted by file name or track number).

6. Controlling playback from the USB memory device including shuffle and Repeat functions is

explained in the section of Music player.

MODE