C. Crane WFR-28 FM-RDS - Manual (Page 68)

67
Sleep timer
Your radio can be set to turn off after a preset time has elapsed. The sleep timer setting can be
adjusted between 15 and 120 minutes in 15 minute increments.
. Press the Menu button and rotate the Tuning Control Rotary until ‘Main menu’ is highlighted.
Press the Tuning Control Rotary to enter the menu.
. Rotate the Tuning Control Rotary until ‘Sleep’ is highlighted. Press the Tuning Control Rotary
to enter the setup. 'Sleep off' will appear on the display.
3. Rotate the Tuning Control Rotary to select the desired sleep time. The options are 15 to 120
minutes in 5 minutes increment.
Use the OFF option to cancel the sleep function.
4. Your radio will switch off after the preset sleep time has elapsed.
5. Your radio will switch into standby mode after the preset time has elapsed.
An active sleep timer is shown using a small timer indicator at the bottom of the playing displays.
This indicator also shows the sleep time remaining before the radio switches itself into standby
mode.
6. To cancel the sleep time before the preset time has elapsed and to turn off the radio, press the
Standby button to turn the unit off manually.
To cancel the sleep timer and leave the radio playing, go back into the sleep timer settings (steps
1 to 3 above) and select the Off option in step 3. Alternatively, simply press the Standby button
twice in succession to cancel the timer and switch the radio back on again.
SELECT /SEEK
6
MENU
1
1,2