BendixKing KLN 900 - Pilots Guide - Manual (Page 46)

3-19 Rev 2
NOTE: The groundspeed (KT) and heading ( °) fields are
not used for actual initialization in an aircraft. However, if
the KLN 900 is in the take-home mode, entering a
groundspeed will allow the KLN 900 to “fly” along the
active flight plan (or to a direct-to waypoint) starting from
the initialization waypoint. A heading may be entered in
the initial heading field while in the take-home mode if the
one offered is not desired. If the take-home mode is
used, remember to re-initialize the KLN 900 to the air-
craft’s location before reinstalling it back in the aircraft.
10.Use the left knobs to select the NAV 2 page. When
the KLN 900 reaches the NAV ready status and is
therefore able to navigate, the NAV 2 page will display
the present position. Verify that the latitude and longi-
tude or the VOR, radial, and distance display of pre-
sent position are correct.