Storix Software SBAdmin Solaris System Recovery Guide User Manual
Page 44
You must define at least one stripe for a RAID 0 device. To do so, move to the # of Stripes field and
press F4. This will produce a list of stripes and/or an option to add a new stripe:
After making a selection from the list, an additional window will appear, allowing you to change the
settings for the selected stripe:
From this window, you must select the device or devices (stripes or other meta-devices) that make up
this stripe. To do so, move to the Device list field and press F4 to select or de-select from a list of
existing devices. To delete the stripe, move to the Create option field and press “D”. When finished,
press F3 or ESC to return to the
.
Hot Spare Pool: You can press F4 in this field to list and select an available hot spare pool. This pool
is a separate SVM device which must already exist, and may be created using the
option described below. Note that hot spare pools are only applicable to RAID 0 devices that are
assigned to mirrored (RAID 1) devices.
When all selections are complete, Press F3 or ESC to return the
•
RAID 1 (mirrored) : When selecting a RAID 1 device, or changing the RAID type of a previous device,
the following options will appear:
Storix System Backup Administrator
44
Version 8.2 Solaris System Recovery Guide