Storix Software SBAdmin Solaris System Recovery Guide - Manual (Page 28)

If you are restoring from a parallel tape device, then you should select all tape drives that make up that
device. Otherwise you should only select a single tape drive.
After selecting the tape drive, press F3 or ESC and the following window will pop-up on the screen:
If the backup you wish to install from is not the first backup on the media, type the backup sequence
number in the Backup Sequence Number field. Refer to the backup sequence number in the backup label
if you do not know the correct backup sequence number to use. If an Autoloader is used with the device,
select “y” in the Autoloader used? field. Refer to Devices for more information on the use of sequential
autoloaders. Once you have selected the desired options, press F3 or ESC to return to the Change
Installation Server or Device menu .
When selecting multiple tape drives, the following window will pop-up on the screen:
Storix System Backup Administrator 28 Version 8.2 Solaris System Recovery Guide