Rane SR 4 - Manual (Page 8)

Manual-8
1. Toggle the Project Window on if it’s not already visible (View > Project).
2a. Drag and drop the Storage configuration listed under the Storage folder
onto a destination remote listed under the Live folder.
- or -
2b. Select the Storage configuration, click the Transfer Config To button,
and then select a destination remote from the list.
- or -
2c. Right-click the Storage configuration and choose Transfer To, then select
a destination remote from the list.
Live to Storage
Important: Transferring from a Live remote to an existing Storage con-
figuration overwrites the Storage configuration.
To transfer from a Live remote to a Storage configuration:
1. Toggle the Project Window on if it’s not already visible (View > Project).
2a. Drag and drop the Live remote onto an existing destination Storage con-
figuration.
- or -
2b. Select the Live remote, click the Transfer Config To button, and then
select a destination Storage configuration from the list, or choose to create
a new configuration.
- or -
2c. Right-click the Live remote and choose Transfer To, then select the
destination Storage configuration from the list, or choose to create a new
configuration.
Editing a Live Remote
It is possible to edit any parameter on a Live remote directly, without first hav-
ing to transfer a Storage configuration to it.
To view the current contents of a Live remote simply double-click the
remote listed under the Live folder of the Project Window. Alternately, right-
click the Live remote and choose Open item. The contents of the Live remote
are then loaded into the Device Configuration window for viewing and/or
editing.
Renaming a Remote
To rename a Smart Remote:
1. Right-click the Live remote in the Project window and choose Properties.
2. Enter a new name for the remote in the Name field.