Canon C75 - Manual (Page 75)

Chapter 6 Speed Dialling 6-7
Speed Dialling
11 Use the numeric buttons to enter the name
that goes with the number (max. 16
characters, including spaces).
• If you are unsure how to enter characters,
→ p. 3-3.
• If you have already registered a name and want to
keep the same name, ignore this step.
12 Press Set.
13 To continue registering other coded speed
dialling codes, repeat the procedure from step
7.
-or-
Press Stop to return to standby mode.
n You can print the CODED SPEED DIAL LIST showing all the numbers and names registered for
coded speed dialling (
→
p. 6-13). Keep this list near your unit so you can refer to it when dialling.
9 Use the numeric buttons to enter the fax/
telephone number you want to register (max.
120 digits, including spaces and pauses).
• To enter a space, press Space. Spaces are
optional and are ignored during dialling.
• To enter a pause, press R (Redial)/Pause.
• To correct a mistake in the number, press l to
delete the rightmost digit.
• To delete an entire entry or to change a previous
entry, press Clear.
• If you have already registered a number and you
only want to change the name, ignore this step.
• To cancel coded speed dialling for the code you
selected, press Clear then Set. Press Stop to
return to standby mode. The fax/telephone number
and the name registered under that code will be
deleted.
10 Press Set twice.
Ex:
Ex:
Ex:
Ex:
TEL=3 3758 2111_
DATA ENTRY OK
NAME
_ :A
Canon Inc. :a
DATA ENTRY OK
A02=
15:00 FaxOnly
Ex: