Canon C75 - Manual (Page 19)

Chapter 2 Setting Up 2-5
Setting Up
Assembling Your Unit
Follow this procedure to assemble your unit:
FAX Models Only
Hold the extension as shown and slide it into the rails on the back of the document tray. Then
slide the inner section of the extension into the inner rails on the document tray.
Attach the document tray to the unit by fitting the slots on the tray into the tabs on the unit.
n • To see how your unit looks fully assembled,
→
p. 2-10.
• For details on attaching the optional handset to your unit, → Appendix B.
MultiPASS Models Only
Your unit comes with the
document tray already
attached. However, if you
accidentally remove the tray,
attach it by fitting the slots on
the tray into the tabs on the
unit. Hold the document support
so that it curves towards the
back of the unit and fit the
tabs on the support into the
slots above the ADF.