Canon IMAGECLASS D460 - Manual (Page 74)

Cop
ying
3-21
2-Sided Copying
7
Press [Start].
To cancel all settings, press [Stop/Reset].
When you switch the mode by pressing the
mode keys such as
[SCAN], all settings
will be canceled. If you want to keep the
settings, store the settings as follows:
[Menu] → →
SETTINGS> → <2-SIDED> (See “COPY SETTINGS,”
on p. 10-3.)
You can skip steps 5 and 6. In this case, the
machine scans 2-sided documents in the
orientation and outputs the
same way.
If you press [Start] in step 5 after selected
, the machine scans 2-sided
documents in the
orientation and outputs the same way.
–
–
–
–
2 to 1-Sided Copying (D460 Only)
You can make 1-sided copies from 2-sided
documents.
1
Place documents in the ADF.
For details, see “Placing Documents,” on p. 2-4.
2
Press [COPY].
3
Press [2-Sided] to select <2 >1-SIDED>,
then press [OK].
2 > 1 - S I D E D
2 - S I D E D
4
Press [ ] or [ ] to select
TYPE> or , then press
[OK].
B O O K T Y P E
T Y P E O F O R I G I N A L
: The front and back sides of the
document have the same top-bottom
orientation.
: The front and back sides
of the document will have the opposite top-
bottom orientation.
5
Use – [numeric keys] to enter the
desired copy quantity (1 to 99).
T E X T / P H O T O 1
1 0 0 % * L T R
Ex.
6
Press [Start].
To cancel all settings, press [Stop/Reset].
When you switch the mode by pressing the
mode keys such as
[SCAN], all settings
will be canceled. If you want to keep the
settings, store the settings as follows:
[Menu] → →
SETTINGS> → <2-SIDED> (See “COPY SETTINGS,”
on p. 10-3.)
You can skip step 4. In this case, the machine
scans 2-sided documents in the
orientation to make 1-sided copies.
–
–
–
–
–