Canon IMAGECLASS D460 - Manual (Page 106)

Settings fr
om a PC (D460 Only)
7-5
Starting the Remote UI
4
Enter the required data.
The required data differ depending on the
authentication mode you are using.
■ For default settings:
① Select [Administrator Mode] or [End-User
Mode].
If you want to change various settings, select
[Administrator Mode]. Selecting [End-User Mode],
you cannot change the settings.
② In case of End-User Mode, enter the User
Name.
■ In case that system manager password is
set:
① Select [Administrator Mode] or [End-User
Mode].
If you want to change various settings, select
[Administrator Mode]. Selecting [End-User Mode],
you cannot change the settings.
② Enter the System Manager password or user
name.
5
Click [OK].