Canon IMAGECLASS D460 - Manual (Page 67)

Cop
ying
3-14
Collating Copies
3
Press [Collate/2 on 1].
C O L L A T E
C O L L A T E / 2 O N 1
If you want to use and “2 on 1
Combination” (see p. 3-15) at the same time,
select , then press [OK].
If you want to use and the 2-
sided copying at the same time, go to step 3
of “1 to 2-Sided Copying” (see p. 3-19), “2 to 2-
Sided Copying (D460 Only)” (see p. 3-20), or “2
to 1-Sided Copying (D460 Only)” (see p. 3-21).
4
Use – [numeric keys] to enter the
desired copy quantity (1 to 99).
T E X T / P H O T O 1
6 3 % * L T R
5
Press [Start].
If you want to copy multiple documents using
the platen glass, place a document and press
[Start] once for each page. When scanning is
complete, press [OK]. The machine prints the
remaining sets of copies.
To cancel all settings, press [Stop/Reset].
When you switch the mode by pressing the
mode keys such as
[SCAN], all settings
will be canceled. If you want to keep the
settings, set the collate mode as follows:
[Menu] → →
SETTINGS> → → (See
“COPY SETTINGS,” on p. 10-3.)”
When scanning multiple page documents,
may appear in the display
and scanning may be canceled. If this happens,
press [Stop/Reset] to return to the standby
mode.
–
–
–
–
–